前刀面槽型结构对D型刀片车削球墨铸铁性能的影响

通过切削力、磨损和冲击切削试验,研究了前刀面槽型结构对D型刀片车削球墨铸铁切削性能的影响。试验结果显示,刀具的第一前角对切削力的影响最大;在10°~15°范围内,刀具前角越大,切削力越低;棱带宽度大的刀片具有更加优异的耐磨损性能;具有正刃倾角的刀片显示出更优异的耐冲击性能。     

Piezoelectricity in Monolayer Hexagonal Boron Nitride

2D hexagonal boron nitride (hBN) is a wide-bandgap van der Waals crystal with a unique combination of properties, including exceptional strength, large oxidation resistance at high temperatures, and optical functionalities. Furthermore, in recent years hBN crystals have become the material of choice for encapsulating other 2D crystals in a variety of technological applications, from optoelectronic and tunneling devices to composites. Monolayer hBN, which has no center of symmetry, is predicted to exhibit piezoelectric properties, yet experimental evidence is lacking. Here, by using electrostatic force microscopy, this effect is observed as a strain-induced change in the local electric field around bubbles and creases, in agreement with theoretical calculations. No piezoelectricity is found in bilayer and bulk hBN, where the center of symmetry is restored. These results add piezoelectricity to the known properties of monolayer hBN, which makes it a desirable candidate for novel electromechanical and stretchable optoelectronic devices, and pave a way to control the local electric field and carrier concentration in van der Waals heterostructures via strain. The experimental approach used here also shows a way to investigate the piezoelectric properties of other materials on the nanoscale by using electrostatic scanning probe techniques.     

Sequence-Dependent Nanofiber Structures of Phenylalanine and Isoleucine Tripeptides

The molecular design of short peptides to achieve a tailor-made functional architecture has attracted attention during the past decade but remains challenging as a result of insufficient understanding of the relationship between peptide sequence and assembled supramolecular structures. We report a hybrid-resolution model to computationally explore the sequence–structure relationship of self-assembly for tripeptides containing only phenylalanine and isoleucine. We found that all these tripeptides have a tendency to assemble into nanofibers composed of laterally associated filaments. Molecular arrangements within the assemblies are diverse and vary depending on the sequences. This structural diversity originates from (1) distinct conformations of peptide building blocks that lead to different surface geometries of the filaments and (2) unique sidechain arrangements at the filament interfaces for each sequence. Many conformations are available for tripeptides in solution, but only an extended β-strand and another resembling a right-handed turn are observed in assemblies. It was found that the sequence dependence of these conformations and the packing of resulting filaments are determined by multiple competing noncovalent forces, with hydrophobic interactions involving Phe being particularly important. The sequence pattern for each type of assembly conformation and packing has been identified. These results highlight the importance of the interplay between conformation, molecular packing, and sequences for determining detailed nanostructures of peptides and provide a detailed insight to support a more precise design of peptide-based nanomaterials.     

钻削GH4169高温合金薄壁件钻削力仿真研究

GH4169高温合金的薄壁钻孔与厚壁钻孔相比有特殊性,运用ABAQUS软件进行钻削GH4169高温合金薄壁件的仿真,研究钻削加工过程中钻削参数和工件厚度对钻削力的影响规律及变化特征,分析应力的分布规律。结果表明:钻削初期,横刃的挤压和主切削刃切削长度的增加使钻削力和扭矩增大;稳定钻削阶段,横刃切出后,主切削刃切削长度不变切削直径增加,钻削力和扭矩稳定增加;钻削后期,副切削刃参与切削,主切削刃切削长度减小,轴向钻削力和扭矩减小,但副刃与孔壁的挤压摩擦,曲线波动较大;钻削速度、进给量及工件厚度的增加都会导致轴向钻削力和扭矩的增加;钻削时的最大应力分布在横刃和主切削刃与工件的接触部位。     

Predicting the damage development in epoxy resins using an anisotropic damage model

For fiber-reinforced plastics, the strain-rate dependent response is governed by the matrix behavior. In this work, the Goldberg model is considered for the epoxy matrix constitutive material model. Moreover, the strain-rate dependency is achieved by direct influence on the elastic modulus, the inelastic strain, and the material strain to failure. In addition, an anisotropic damage response is implemented and extended through a strain-rate dependent definition. Since the constitutive model relies on nonphysical parameters, a parameter study is further performed. Additional numerical investigations using a micro-mechanical model are performed. Tension and shear loading conditions are evaluated and the influence of different strain rates is explored. Furthermore, the implemented anisotropic damage model is compared and discussed against an isotropic damage model.     

硬孔攻丝用高性能先端丝锥的设计及应用

热后硬孔攻丝螺纹变形量小、尺寸稳定、强度高。该工艺方法对刀具强度要求较高,使用普通高速钢丝锥和螺纹铣刀加工时,普通高速钢丝锥无法承受热后硬孔攻丝所产生的大扭矩而频繁折断,报废率较高,同时螺纹铣刀成本高,不适合大批量生产。针对热后硬孔攻丝工艺复杂、成本高的问题,专门设计了硬孔攻丝用高性能先端丝锥,解决硬孔攻丝难题,并与其他种类丝锥进行了切削力对比。     

预压力对压电驱动履带移动系统的性能影响

为了提高夹心式压电驱动移动系统的机械输出性能，提出了一种U型预压力调节机构，并开展了预压力对夹心式压电驱动履带移动系统输出性能影响关系的实验研究。首先，针对U型预压力调节机构的安装对夹心式压电振子的振动特性影响关系开展了有限元仿真分析，发现U型预压力调节机构始终处在夹心式压电振子的两相工作模态振动节点位置；其次，开展了夹心式压电驱动履带移动系统的原理样机的预压力调节测试实验，确定了系统的最大输出牵引力及其所对应的最佳预压力；最后，在最佳预压力工作状态下，开展了原理样机的牵引力特性、越障性能以及模拟月壤环境下的运动特性实验。研究结果表明，在最佳预压力工作状态下，夹心式压电驱动履带移动系统的机械输出性能最佳，为其进一步在月面巡视器上的应用提供了技术支持和试验基础。     

带式输送机驱动滚筒的有限元分析

针对带式输送机驱动滚筒轴向受力情况,提出了正态分布模型,结合ANSYS-APDL的语言编辑能力,用ANSYS Workbench对均匀分布、一阶正弦分布和正态分布的4种模型进行有限元分析,得到驱动滚筒应力应变图及位移变形的对比情况,为日后实验验证与优化设计提供理论支持。     

变截面涡旋盘高速铣削仿真加工与实验研究

为减小变截面涡旋盘涡旋齿的变形,提高加工精度,需确定合理的铣削参数。开展了变截面涡旋盘高速铣削仿真与实验研究以确定铣削参数的合理取值范围;选用HT250变截面涡旋盘为研究对象,研究了更接近实际的材料本构模型、刀-屑摩擦模型和热传导控制方程等关键技术;建立了变截面涡旋盘几何模型和简化后的二维铣削模型,利用ABAQUS软件仿真切屑成形过程及不同的铣削参数对铣削力、铣削热影响的变化曲线;通过多因素正交实验加工变截面涡旋盘。结果表明:当主轴转速为3500 r/min、每齿进给量为0.1 mm以及切削深度为2.5 mm时进行铣削更加合理。铣削变截面涡旋盘的研究为加工参数的选择提供了依据和参考;依据实验后所得的铣削参数进行铣削可减小铣削力、铣削温度及齿变形,提高了变截面涡旋盘的加工效率和质量。